Tools Popular is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

How To Remove Drill Bit

How To Remove Drill Bit

In this article, we will know how to remove drill bit.

Electronic drills have become fundamental in our day-to-day activities. Bits, on the other hand, are vital to this machine’s function. Bits for electric drills come in a wide variety of shapes and sizes, making them versatile tools.

First, take off the existing bit from the drill’s end before you may attach the new one. Bits can be manually removed or removed by the drill on most current drills. A drill chuck key is required if you want to remove a bit from an older drill or drill press.

Changing bits allows you to do numerous tasks at once. However, what happens if the drill bit becomes stuck? If you’re not careful, you risk damaging the bit and the drill in your haste to remove it. So, what’s the best way to free a jammed drill bit?

Removing the bit from the machine is a piece of cake. In this post, we’ll go over three different strategies for removing your drill bit.

Removing Bit With Hand

Find the drill chuck.

How To Remove Drill Bit

First of all, you have to find the chuck of the drill. The drill’s chuck maintains the bit in position during drilling. The outer part of this item is generally plastic, and it rotates back and forth. It can be found at the end of the drill machine.

Rotate the chuck counterclockwise

Turn the chuck counterclockwise while holding the handle. Then you can feel that its inner elements will begin to loosen, allowing your drill bit to run freely. Until it happens, keep spinning the chuck. Make sure you’re working over a desk to prevent the piece from falling to the ground.

Please don’t lose the bit; put it away.

If you don’t want to lose the bit, store it in a ziplock bag or keep it with your other drill bits. You may also store them in a toolbox to keep them well-organized.

If the chuck is stuck, try unscrewing it.

If you can’t spin your chuck, it’s likely stuck. Turn the chuck screw counterclockwise with a screwdriver inserted into the drill’s tip. The chuck should be able to spin now that it’s been freed up a bit. To fix this, turn your chuck again and reinstall the screw.

Using a wrench to turn it counterclockwise.

If the chuck is stuck, use a wrench to turn it in the opposite direction of the clock.

In this case, the chuck may be stuck if you can’t turn it with your hands. Using a big wrench or vice grips, spin the chuck in the opposite direction of rotation. But there is a risk. Forcing a jammed chuck might lead to more damage to the drill.

Removing the Bit with a Drill

Push the drill’s left-side button

On your electric drill, there must be a button located just above the handle. When you press this button, the drill will rotate in one of two directions: clockwise or counterclockwise. The drill will rotate counterclockwise if the button is pushed in on the left side and clockwise if the button is pushed in on the right side. You’ll need to spin the bit counterclockwise to remove it.

Hold the drill’s chuck.

After the previous step, you have to hold the drill’s chuck in place at the other end. Drill bits are held in position by the chuck, which is commonly constructed of plastic. While operating your drill, hold the chuck’s end firmly in position with your empty hand to prevent it from rotating.

Make a move by pulling the trigger.

Pull the trigger while holding the chuck. This should remove your bit by rotating the chuck’s internal parts. After removing the bit from the drill, set the bit away in a secure location to avoid losing it.

If the chuck is stuck, use a wrench to turn it.

You can use vice grips or a wrench to turn it counterclockwise if the chuck is stuck. You’ll have more power and be able to spin it this way manually. Keep in mind that doing or using this might cause harm to your drill.

Using a Key to Remove a Drill Bit

Locate the drill’s exit holes

A specific key fits into the end of drills and drill presses that are more than a century old. Locate the chuck, which is the section of the drill where the bit goes. Before the bit can come free from a drill press, you may have to remove any screws in the drill press.

Place the key in the holes and turn it counterclockwise

A key that fits into the chuckholes should have been included with your drill. Turn the key 5-6 times counterclockwise after inserting the key’s end into the chuck’s hole. This should begin to loosen the drill bit. The chuck key that came with your drill will not work if you lose it. If it occurs, then you will have to buy a new one.

Adjust the chuck’s pressure by loosening the retaining screws

Start with one hole and move up until you’ve removed all of them. The bit should come out of the drill after they are all freed, and do not put the drill bit back in the chuck until you have finished using it. If you can’t get the drill bit to move, you didn’t loosen all of the holes completely. Make a second pass to ensure that you’ve turned them all in the opposite direction of the clock.

Some Important Tips For The Beginners

Even after reading this guide, you might have few confusions or lack of understanding, of course you are just a beginner in this field. So here we are with our expert advice.

Before proceeding to the work, investigate and get proper knowledge of drill chuck, chuck key, drill bit stuck, chuck key counterclockwise, keyless chuck, cordless drill, jaws of the chuck, corded drill, power drill, stuck drill bit- stuck drill bit is important, so gather proper knowledge about stuck drill bit, chuck key clockwise, Makita drill, chuck jaws- find out the chuck jaws in your drill, drill spins, drill key, drill driver, remove the bit, loosen the chuck, strap wrench, clockwise direction, thick gardening glove, power drills, start drilling, locking mechanism, ratcheting mechanism, counterclockwise direction, trigger gently, installed straight, broken bit, chuck open, hammer nothing, diy tasks, diy projects, bit into the chuck, chuck opens.

Then also know about hole, screw, turn clockwise, smooth part, screw is important, easily slide, three or four pieces, pull, tools, loose, hold the bit, the way you hold the bit or loosen the chuck, remove the bit makes the work easy, new bit, almost all drills, rotate, and about the tighten. You can read our floor drills reviews here.

Users Common Problems

1. Although this handle dropped during drilling, the base stopped from spinning, and only the chuck’s head was rotating in the grip direction. Now that the chuck is too tight, it appears like I will be unable to remove the bit.

Solution: Put the drill in reverse and pull the trigger until you can no longer hold on. If you hear clicking, but there isn’t a lot of power, increase the torque setting. After that, if it still won’t move, use something more powerful than your hand in order to keep the drill’s chuck in place. A wrench is ideal for this operation since it won’t do any harm to the chuck.

2. When the drill bit becomes stuck in the material, what should I do?

Solution: To begin, grip the bit with pliers and spin it counterclockwise using the pliers. This will allow you to work on extracting the drill bit from the wood while it is no longer connected to the drill.

If it’s too deeply ingrained in the content, this strategy won’t work. If this is the case, you should consider drilling the bit out yourself. To do this, remove the drill bit by following the steps mentioned above.

To fix the problem, use a bit with a greater diameter than the stock one. Prepare for drilling by getting accurate readings before you begin. You’ll be able to remove the bit once you’ve completed this step. The drawback of this strategy is that the two bits will have to crush each other to function. Because of this, they may need to be changed if they get dull.

3. How can I remove a broken drill bit?

Solution: You’ll have to use pliers to get a hold of the broken piece. After that, carefully begin to turn the chuck counterclockwise. This should allow you to properly remove the drill bit from the drill after releasing the bit’s pressure.

Here’s an important safety reminder: drill bits have razor-sharp edges, and they can easily shear off. Because of this, to avoid injury, you must use attention when handling the bit.

4. How can we avoid drills bits from getting stuck?

Solution: Firstly, it’s possible the chuck wasn’t properly polished. It’s a significant factor in getting your bits stuck up. Drill greasing is a vital step in the maintenance of the machine. This will make inserting and removing the drill bit much simpler.

However, it’s possible that in certain cases, the chuck was tightened too much. The vibrations from the drill might have pressed the chuck on the drill bit even further. Even if the bit is loose now, it may be difficult to remove later.

Make sure you are using the appropriate drill bit for the task as well. For example, certain drill bits are made for drilling metal, while others are better suited for woodworking applications. This will minimize the possibility of the drill bit shearing off or becoming trapped during the drilling process.


An electronic drill is essential for our daily life. But we have also seen many problems with this machine. We proposed three important methods for removing bits from your drill. When a drill bit becomes stuck, you have a number of options. However, in general, you’ll have to take the chuck apart and loosen it. To attempt to loosen it, you may need to use a wrench or screwdriver. The drill bit should come out easily after the chuck is unlocked. Hopefully, this article will help all.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.