Tools Popular is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

How To Unlock Dewalt Miter Saw?

How to Unlock Dewalt Miter Saw

Dewalt miter saw is one of the most popular choices among contractors, carpenters, and DIY enthusiasts. 

This power tool is easy to use and very reliable than other brands. You can use it for various projects, from simple home improvement tasks to professional carpentry work. 

But when you first buy a Dewalt miter saw, you’ll notice that it is locked. You are unable to operate this important tool when it is locked. 

Thus, you need to have a clear understanding of how to unlock Dewalt miter saw when it is locked. Do you wonder how to do it? Don’t worry, we will demonstrate the way to unlock your Dewalt miter saw.  

Instructions on How to Unlock The Dewalt Miter Saw

How to Unlock Dewalt Miter Saw

The Dewalt miter saw is locked for safety reasons. This prevents accidental cuts while the tool is idle or stored.

Unlocking the Dewalt miter saw is very easy. You just need to follow some simple steps. Below, we have outlined the steps that you need to follow to unlock a Dewalt miter saw:

Step 01: Unlocking the Head

Firstly, it is necessary to unlock the head of the saw. In order to unlock the head of your miter saw, you will need to locate the small knob on top of the machine. 

The knob is designed to keep the heat locked in when the miter saw is stored. Once you locate the knob, press gently on the knob and move it. As a result, the miter head will unlock. 

Step 02: Unlocking the Down Position Lock

The next step is to unlock the down position lock. A knob is used to lock the position downward. Simply open the knob, and then this will be unlocked.  

Step 03: Unlocking the Pull or Push Lock

After unlocking the down position lock, you need to unlock the pull or push lock. This lock is used to secure this machine in the pulling or pushing position. 

A knob and pin serve as the locking mechanism. Unlocking this part is relatively easy. The pin will be unlocked once you pull or push the knob at the end of the pin.

Step 04: Unlocking the Angle Lock

Now, you need to unlock the angle locks. This lock can be found on the front of the miter saw. It is secured with a knob. Some models use both a knob and pin to secure this lock. 

The knob and locking pin are located on the same side of the lock. To unlock the two locks of the angle, you must push and turn the knob and pin. 

Once this has been accomplished, the angle locking system will be unlocked. Be careful not to push the knob too hard as this may damage the machine. 

Step 05: Unlocking the Knurled Knob Lock

The knurled knob lock is another locking function on the Dewalt saw. Unlocking this lock is easy. In order to unlock this lock, you simply have to twist the knurled knob in a counterclockwise direction. When you turn the knob, it will loosen and the lock will become unlocked. 

Step 06: Unlocking Preset Angle Lock

This is another locking mechanism of the Dewalt miter saw. There is a lever on the miter saws that are already spring-loaded. 

In order to unlock it, you need to use your index finger or middle finger. It’s a simple process and doesn’t require much effort.

Step 07: Unlocking Bevel Lock

Bevel locks are available on Dewalt miter saws with tilting bevels. This particular lock is found on sliding miter saws and compound saws. 

To unlock the tilting bevel locking system, locate the lever or metal pin and make a gentle push on it. After that, the bevel will unlock, allowing you to move it easily.

Step 08: Unlocking the Base Lock

Dewalt miter saws have a base for greater convenience and support. This base is movable and is locked by a single knob. 

It is necessary to twist the knob gently in order to unlock the base locking system. Upon unlocking the locking system, the base can be moved in any direction. Re-lock the knob to hold the base in place when your positioning is complete.

Step 09: Unlocking the Slider Lock

The slider lock is responsible for securing the sliding rails of the miter saw. To unlock it, turn the knob in an anti-clockwise direction. It’s a simple process that doesn’t require much effort. By completing this step, your learning of how to unlock a Dewalt miter saw has been accomplished.  You can also check the user manual for additional information.

How to Use the Dewalt Miter Saw?

After unlocking all the locks on the Dewalt saws, you’re now ready to use it. It is simple to operate, but it must be used with caution. You can add a professional touch to your work if you use it correctly. To use this saw, follow these steps:

Step 01: Prepare the Pieces Of Wood

Firstly, you will need to prepare the lumber for cutting. Mark the timber with a pencil to indicate where you will be making your cuts. By doing so, you will be able to make more precise cuts.

Step 02: Prepare the Saw

Secondly, you will need to prepare the saw. Ensure that it has been plugged into a power source. The saw will then be able to function. 

Step 03: Set the Angle

After the saw has been plugged in, you will need to adjust the pre set angle positions. You must set the miter saw in the desired position in order to make accurate angled cuts.

Step 04: Put the Wood On the Saw

Once you have prepared the saw and set the angle, it’s time to put your lumber on the miter saw. Place the timber on the saw in a way that makes it steady and secure.

Step 05: Press the Power Button

Now you can press the power button to start the miter saw. Once the blade has begun rotating, you will be able to make a cut.

Step 06:  Put the Saw Down Slowly and Cut the Wood

After the saw has been turned on, you can then bring the blade down slowly. Follow the markings that you have previously made on the lumber. You can then continue to cut the timber into the shape that you desire.

Step 07: Shut off the Saw

Be sure to turn off the saw once you have finished making your cuts. After shut-off, it is safe to remove your pieces of timber from the saw. Then unplug the miter saw and store it. 

Safety Precaution When Unlocking and Using the Dewalt Miter Saws

When unlocking and using the Dewalt miter saw, always take precautions to avoid injury. Remember that the machine has sharp and dangerous parts and can injure if not handled correctly. The following safety measures should be followed:

1. To unlock a Dewalt miter saw, ensure that it is turned off and unplug the power cord from the electrical outlet.

2. Please wear safety gear like gloves, goggles, and ear protection when working with the machine.

3. Always ensure that the machine is stable and steady before starting this process as it involves moving parts around which can be dangerous if not done correctly.

4. Keep hands and fingers away from the blade when unlocking and using the saw.

5. Take your time and be patient when unlocking all the locks on the saw.

6. Do not apply excessive force when unlocking the locks as this may damage the machine.

7. Always clean up the work area when finished to avoid any potential accidents.

8. Once you have finished using the machine, relock all the locking systems and cover the blade guard. This will prevent any unnecessary accidents from occurring.   


You need to know the answers to some of the most frequently asked questions about the miter saw. Following are some answers to some of the most common questions: 

1. What Type of Blade Is Used on a Miter Saw?

In general, most models of miter saws are used crosscut type blades. This type of blade delivers smooth and accurate cutting along the grain of the timber.

2. Which Blade Size Is Used on the Miter Saws?

Miter saw blades generally come in sizes of 8, 10, and 12 inches. Large size blades are used for cutting large pieces of lumber. The majority of Dewalt miter saws have 12-inch blades.

3. Is It Better to Have More Teeth on Your Miter Saw Blade?

More teeth on a blade will result in a finer finish and smooth cutting of timber. The teeth of a normal miter saw blade will typically range from 60 to 80.  Blades with a tooth count of 50-60 work best for rough cutting of lumber. For trim work, a precision blade typically has 80-100 teeth. 

4. Can You Use a Miter Saw on the Floor?

It is possible to use a miter saw on the floor. However, this is not recommended due to the danger involved. It is best to use a miter saw stand or bench to elevate the machine and make it more stable while cutting.


Hopefully, you can now understand how to unlock Dewalt miter saw, and the way to use it properly. As you can see, the entire process is surprisingly simple and easy. 

If you follow the instructions carefully, you should have no trouble unlocking or using your Dewalt miter saw. 

Before attempting to unlock and use your Dewalt miter saw, make sure you follow all the safety precautions. In this way, you can avoid potential accidents and do your work in a safe and effective manner.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.